10. Adjustment of Air Flow:
The top airflow system can be adjusted with slight twisting motions of the top lid which will not loosen its attachment to the pyrex glass.
11. Filling E-liquid:
This easy top-fill tank will only ask of you to screw out the lid and fill in the chamber when the base is securely shut.Be sure to safely position the glass part when this process is
in place to avoid spillage.
12. Changing Atomizer:
Unscrew the base to simply remove and insert a new atomizer whenever needed. Pull the EUC out from the base and insert a new one. Screw the Base on. Wait after replacing
to make sure the coil is well primed.
Main features
● OMNI Board 2.0, DO IT ALL
● Palm Size Design,Easy to carry
● Top Battery Cap,Convenient to Use
● Revolutionary IML Case,Durable and environmental friendly
● Universal Coil Selection, GT Cores Available
● Twist Open Design, Easier Refilling than Ever
● Smooth Adjustable Bottom Airflow
Thank you for choosing Vaporesso Products!
SWAG Kit by Vaporesso is modern in design, adopting IML technology that is more
durable and environmental friendly. Powered by single 18650 battery (not included),
it is capable of 80W output power. The top battery cap is easy to open and close
which is extremely important for such a compact size mod.
The Built with OMNI Board 2.0, in addition to the more flexible settings, it also adds
many user friendly features that would help the vaper to enjoy vaping.One of the new
user friendly feature is RCT (Remaining Charging Time) that would show how much
time it takes to get the batteries fully charged. It also adopts fast charge system and
Equalizing charge system.
Paired with the NRG SE Tank with twist Open design, smooth adjustable bottom air
flow, it keeps the same universal compatibility coil selections from GT Core 2 all the
way up to GT Core 8 as well as GT Ceramic coils. This little magic invention is the
most amazing flavor tank Vaporesso has ever made. This is truly a swagger piece.
Can you handle my SWAG?
Please read this manual carefully to ensure proper use. For additional information or
questions regarding to this product or its use, please visit
www.vaporesso.com
Quick Guide
Swag kit
How to Use
1.Switch On/Off:
Press the fire button 5 times in quick succession within 2 seconds to turn the device on. In the same way, the device will be powered off after 5 presses.
2.Vaping:
Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale
.
3.Screen Display:
After switch on, the OLED displays voltage resistance, battery level, temperature, output wattage etc. Press the fire button at any time, the screen will be lit with main menu.
4.Automatic atomizer recognition:
The mod will read the coil's resistance as soon as the connection is detected. It will also recognize coil type, when a kanthal coil is used, the mod will shift from TC to wattage
mode automatically.
5.Adjustment buttons lock/unlock:
Keep pressing mode button and “+”button simultaneously for two seconds when the device is powered on, then the up and down buttons will be locked and the screen will
display “SYSTEM LOCKED”. In the same way, pressing the up and mode buttons can be unlocked and the screen will display “SYSTEM UNLOCKED”.
6.Switch display mode:
Keep pressing up button and down button simultaneously for two seconds ,the screen display will rotate 180 degrees.
7.Switch vaping modes:
Long press the mode button for three seconds to switch among VW(H/N/S) /VT(Ni200, SS, Ti)/ TCR / BYPASS / CCW / CCT modes.
8.Charging:
It is with Quick Charge System and equalizing charge system. Simply plug in the USB cable to charge the battery, OLED display current battery level (0%, 20%, 50%, 80%, and
100%) and the Remaining Charging Time to get the battery fully charge. The Remaining Charging Time will be shown in every10 minutes. And the display will remain lit while
charging.
9.Firmware update and customizing:
Can be updated and customized through a simple software that can be downloaded directly from our website. The software will be made to run on Windows systems and will be
available in English. It will also include a “help”sections for urgent questions. The directions on how to use our software will be found on our website and Facebook page.
Swag Kit
Package Include:
1 x Swag Mod
1 x USB Cable
1 x NRG SE Tank
1 x Extra Pyrex Glass Tube
1 x Extra GT CCELL
1 x GT2 Core(Pre-installed)
Swag Mod
Package Include:
1 x Swag Mod
1 x USB Cable
Power Button
+
OLED Display
Mode Button
IML Case
Drip tip
Top Lid
Base
Pyrex glass tube
GT Cores
Specification:
Swag Mod
Diameter: 74.8 x 47.9 x 25.3 mm
Weight: 64g
Output Modes: Smart VW(H/N/S), CCW, CCT,VT(NI,TI,SS),
TCR(M1,M2), RCT, BYPASS
Temperatue Control Range:100°C-315°C/200F-600F
Output Power: 5-80 Wattage
Display: OLED 0.91”
Resistance range: 0.05Ω-5Ω
Thread: 510 thread
Max Output Current: 50A
Voltage Range: 0 - 8.5 v
Battery Cell: 1x18650 Battery(not included)
Specification:
NRG SE Tank
Dimension: 22 x 48.5mm
Weight: 46 g
Capacity: 3.5 ml
NRG SE Mini Tank
Dimension: 22 x 46mm
Weight: 44 g
Capacity: 2 ml
How to Set the Mode
1) Smart VW mode:
As an advanced Variable Wattage mode, there are 3 levels of VW: H stands for High; N stands for Normal; S stands for Soft. The default setting is Normal. VW(H/N/S) will
guarantee your mod’ s ability to skillfully select the adequate average wattage for your atomizer, according to its resistance reading, automatically.
2) In CCW mode:
While on VW mode, press the mode button three times consecutively to select CCW. Select and hold down the mode button to confirm and to implement any modifications to
the wattage line using the plus and minus buttons (Ramp up time and consequent performance); move on to the next bar with a quick press of the mode button. When all
modifications are final hold pressed the mode button to save and exit.
3) In TC-Ni/TC-Ti/TC-SS/TCR(M1, M2) Mode:
When set in TC-Ni/TC-Ti/TC-SS mode, the device can separately support Nickel 200, Titanium, and 316 Stainless Steel coils. The OMNI Board 2.0 allows you to change the
start up wattage under temperate control mode. The default wattage is 65W. You could also adjust the value of the coil within the given range.
In TCR (Temperature Coefficient of Resistance) mode, the device can support different temperature control coils within different TCR value ranges and you can set the TCR at
different values within proper range.
The Setting of TCR Mode (M1,M2):
When set in TC-Ni/TC-Ti/TC-SS mode ,and the device is powered on, you will enter into the TCR (M1,M2) set menu, by clicking mode bottom 3times:
1. Press mode button to choose among M1, M2 ;
2. Press the up or down button to increase or decrease the TCR value according to the material of the coil you used;
Following are different TCR value ranges for different coils for your reference:
Note: 1.The TCR value in the sheet is 10 multiplied of the actual TCR.
2.Our total range of TCR value is 1-1000.
Adjust temperature:
In TC-Ni/TC-Ti/TC-SS/TCR(M1,M2) mode, temperature can be adjusted from 100-315
℃
or 200-600
℉
by pressing up button or down button, up button to
increase and down button to decrease. Each press of the up or down button will increase or decrease the temperature setting by 5
℃
or 10
℉
. Long press up button or down
button can rapidly increase or decrease temperature setting.
Lock/Unlock resistance:
In TC-Ni/TC-Ti/TC-SS/TCR(M1, M2) Mode, press the "-"and mode button simultaneously for 2s will lock/unlock the resistance level, “ ” will appear
on the display. Attach a new atomizer will not change the locked resistance.
Automatic atomizer recognition:
To achieve better temperature control effect, the mod will ask the user if the new atomizer is attached. " OLD LOAD: -, NEW LOAD: + " will
appear on the display. If a new atomizer is attached, press " + ", the mod will read new resistance; if not, press " - ", the mod will read at locked resistance.
4) In CCT mode:
While on any TC mode, press the mode button three times consecutively to select CCT. Select and hold down the mode button to confirm and to implement any modifications to
the temperature line using the plus and minus buttons (Ramp up time and consequent performance); move on to the next bar with a quick press of the mode button. When all
modifications are final hold pressed the mode button to save and exit.
5) In Bypass mode:
Direct output voltage system is applied in Bypass mode. The higher the batterylevel is, the higher the output voltage is. When set in this mode, the device can support a coil
whose resistance is within the range of 0.05-5ohm.
6) Smart ON/OFF:
As an advanced Variable Wattage mode, Smart VW could be switched on and off on the main manual and it does not impact the VW(H/N/S). Enter Smart ON/OFF and press
Yes or NO to confirm.
7) Screen Timeout:
The timeout setting could be adjusted from 3 seconds up to 120 seconds. Enter the Screen Timeout and adjust the time up or down as you wish.
8) Default:
You could reset to default setting by entering Default and pressing YES.
Material
Nickle
Titanium
NiFe
SS(303,304,316,317)
TCR Value Range 600-700
300-400
300-400
80-200
Smart VW
Main Menu
VT
RCT
1
2
3
1
3
2
Manufacturer:Shenzhen Smoore Technology Limited
Designed in California
Add:Building 8,Dongcai Industrial Park,Gushu Town,
Baoan District,Shenzhen, China 518102
Management System of SMOORE factory has been assessed
and registered under the Norm cGMP, ISO13485, ISO9001
and ISO14001.TM and ©2016 Vaporesso All rights reserved
This refillable electronic cigarette is intended for use with compatible liquid, which may contain nicotine. Nicotine is an addictive substance and its
use is not recommended for use by the following:
- Non smokers or persons under the legal smoking age
- Pregnant or breastfeeding women
- Persons experiencing heart disease, stomach or duodenal ulcers, liver or kidney problems, long-term throat disease or difficulty breathing due to bronchitis,
emphysema or asthma.
- Persons with an overactive thyroid gland or experiencing phaeochromocytoma (a tumour of the adrenal gland that can affect blood pressure)
- Those taking the medications Theophylline, Ropinirole or Clozapone
You may experience the following side effects if you use nicotine containing
e-liquid in combination with this product. If this happens, please consult a
healthcare professional and show them this leaflet if possible:
- Feeling faint / - Nausea /- Dizziness /- Headache /- Coughing
- Chest palpitation or an irregular heart rate /- Irritation of the mouth or throat
- Stomach discomfort /- Hiccups /- Nasal congestion/- Vomition
This device should not be used by persons under the age of 18 or non-smokers.
Protection Functions
USB Input Protection
Equalizing charge system
Low voltage protection
Output short circuit protection
Low resistance protection
Over-temperature protection
Overcurrent protection
Anti-loaded battery protection
Caution
1. It is intended for usage by people over 18, NOT by non-smokers, children, pregnant or breastfeeding
women, people with or at risk of heart disease, or people taking medication for depression or asthma.
The electronic cigarette is not a smoking cessation device.
2. Please keep this unit out of reach of children or pets;
3. Please don't drop, throw or abuse your Mod,it may cause damage.
4. Do not place it in extremely temperatures;
5. Do not try to disassemble the battery.
Precautions:
1. Don' t use the device in stormy weather or dust condition.
2. Connect the USB port and charger properly. Unplug the charger when the charging is completed.
3. Don' t put the device in your pocket or handbag directly; don' t mix it with coins, jewelry or other hard objects.
4. The charger and battery may heat when charging, keep away from flammable gas, liquid or other materials.
