Package include
Specification
Target Pro Tank
1
Complete
T
arget
Pro
Tank
(
C
CELL
S
S
0.5
Ω
p
re
-
i
nstalled)
1 Target Pro Box
1 Extra CCELL
SS
0.6
Ω
1 USB cable
1 User
M
anual
Diameter
:
22mm
Length
:
53.5mm
Weight
:
60g
Capacity
:
2
.
5ml
Target Pro
Characteristic
:
Target
Pro
B
ox
M
od
O
utput
75W
supports VT:
0
.
05
Ω-
1.0
Ω
VW:0
.
15
Ω-
3
Ω
4
Adjusting
m
odes
:
V
ariable
T
emperature
:
Ni/SS/Ti/TCR
Variable
Wattage
,
S
tainless
S
teel
,
T
itanium
TCR
Mode
A
vailable
a
t
F
irmware
U
pdate
Automatic
Atomizer
R
ecognition
Aqueous
Ceramic
C
oated
S
urface
Thank you for choosing Vaporesso Products!
Target
Pro is the most innovative vaping product,
featured in its unique shape for a great fit in the hand,
and a trigger-style vape button that is easy to use for
both left-handed and right-handed users. It also brings
a revolutionary atomizing technology: CCELL coils,
which are made out of a porous material that ensure
not only better flavor but also no splashing, no dry hits
and guarantee a longer life cycle. this device has a
superb design, comes with temperature control and
variable wattage functions, and
can power up to 75w
using a single 18650 battery. It’s magnetic battery
cover is very user-friendly. This fine kit will bring you a
sensational vaping experience.
Please read this manual carefully to ensure proper use.
For additional information or questions regarding to this
product or its use, please visit
www.vaporesso.com
Target Pro Box
VT:
0
.
05
Ω-
1.0
Ω
VW: 0
.
15
Ω-
3
Ω
Dimension
:
92
x
48
x
27
mm
Weight: 180g
Temperature Range: 100
℃
-315
℃
/200F-600F
Output Wattage: 5w to 75w
Suitable atomizer:
Output Modes:VT/Ni/SS/Ti/TCR
﹤
Standby Current:
50uA
Voltage range: 0-9V
Battery Cell: Lithium 18650
Casting: Zinc Alloy and stainless steel
Thread: 510 thread
Display: OLED
USB Updatable and customizable firmware
Filling E-juice
Changing the atomizer
Warning:
1. To refill the E-juice from the top, simply twist open
the lid.
2. Once filled, twist back shut and resume use.
1. Remove the tank from the battery and turn the tank
upside down;
2. Unscrew the air flow base and carefully set your
tank aside;
3. Unscrew the atomizer unit counterclockwise;
4. Once removed, discard the used one. Screw the
new atomizer unit clockwise into the air flow base;
5. Screw the air flow base back to the tank body.
When using a new atomizer, after filling E-juice,
let the tank stand for 2 minutes, so the ceramic
can be saturated with juice before firing;
Refill the tank before the tank become completely
empty in order to avoid dry burning or damage to
the atomizer.
Target Pro Box Operation Guide
1.
Switch on/off:
2. Screen Display:
3. Automatic atomizer recognition:
4. To vape:
5. Adjust wattage:
6. To rotate the screen display:
7. To lock the diameters:
after a battery is installed, press the
power button 5 speedy times to switch on the mod,
"Vaporesso" will appear on the screen.
after switch on, OLED displays
voltage, resistance value, battery level, temperature,
output wattage; the display will shut off if unused for
15s, the screen will be relit by pressing the fire button.
the mod will read
the coil's resistance as soon as the connection is
detected. It will also recognize coil type, when a
kanthal coil is used, the mod will shift from TC to
wattage mode automatically.
Long pressing the power button to vape, it
will initiate 10s' counting down to limit maximum time
for one puff; pressing longer than 10s will shut it down,
"over 10s" will be shown on the screen.
Press the " + " " - " to adjust the
wattage at 0.1 increment, long-press will adjust at an
accelerated rate.
fast click fire button
3 times.
P
ress the " + " steadily
while press the power button simultaneously, "
SYSTEM LOCKED" appears on the screen. Repeat
the motion to unlock.
Plug in the Micro USB cable to charge
the battery, OLED display current battery level (0%,
20%, 50%, 80%, and 100%), The display will remain lit
while charging.
Press " + " " - "together to switch
between
wattage mode
and
different
temperature
control mode
s
.
At
temperature
control
mode,
press the “ + ” “ - ” to adjust the temperature at 10℉
or 5℃, long-press will adjust at an accelerated rate.
At
temperature
control
,
press the " -"and power button simultaneously for 2s
will lock/unlock the resistance level, " " will appear
on the display. Attach a new atomizer will not change
the locked resistance.
To achieve better
temperature control effect, the mod will ask the user if
the new atomizer is attached. " OLD LOAD-, NEW
8. Charging:
Temperature Control
1. Switch 4 modes:
2.Adjust temperature:
3.Lock/Unlock resistance:
4.Automatic atomizer recognition:
LOAD + " will appear on the display. If a new atomizer
is attached, press " + ", the mod will read new
resistance; if not, press " - ", the mod will read at locked
resistance.
The firmware
can be updated and customized through a simple
software that can be downloaded directly from our
website. The software will be made to run on Windows
systems and will be available in Chinese or English. It
will also include a “help” sections for urgent questions.
The directions on how to use our software will be
found on our webiste and Facebook page.
Over - temperature protection
(PCBA temperature less than 65
℃
)
Low battery protection
Short-circuit protection
Low resistance protection (Resistance
≧
0.13Ω)
Reverse connection of the battery power terminal
Over-charge protection and over discharge
protection (2.9v-4.3v)
No atomizer detection protection
Over current protection
5
.
Firmware
update
and
customizing:
Target Pro Box Protection functions
Caution
1. The Target Pro is intended for usage by people
over 18, NOT by non-smokers, children, pregnant or
breastfeeding women, people with or at risk of heart
disease, or people taking medication for depression
or asthma. The electronic cigarette is not a smoking
cessation device.
2. Please keep this unit out of reach of children or
pets.
3. Please don't drop, throw or abuse your
Target
Pro
,
it may cause damage.
4. Please keep the battery dry.
5. Do not place it in extremely temperatures.
6. Do not try to disassemble the battery.
7. This device does not mean to be used as a nicotine
replacement therapy for smoking cessation.
Drip tip
Tip connector
Pyrex glass tube
CCELL atomizer
Air flow base
OLED display
+
-
Micro USB
Magnetic cover
Power button
Target Pro
Quick Guide
