1. Getting
Started
What’s In the Box
•
1 x
VFE-L -
An
amazing VaporFlame Engine unit
•
1 x Integrated Power Cord
•
1 x Integrated Air/Water Hose
•
1 x VFE-L Manual
•
1 x VaporFlame Bleeder Hose
•
1 x VaporFlame Blow O
ff
Valve
“Let’s Unpack That…”
Hey! Look at that! You are the proud owner of a shiny new VaporFlame Engine. You
now have the power to make “fire” from water- Pretty cool huh? As you unpack your
VaporFlame engine from its shipping material make sure all the parts are present.
Inspect the engine for damage that may have occurred in transport. The VaporFlame
fixtures are pretty hearty, but sometimes accidents happen. Please keep the original
packing material for inspection. If a fixture must be returned to the factory, it is
important that it is sent in the original packing.
Powering Up
All engines must be powered directly via circuit and cannot be run o
ff
a rheostat
(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used
solely for a 0% to 100% switch.
The VFE-L Engine requires an input voltage of 110 VAC/60Hz.
Be sure the input
voltage applied to the fixture matches these specifications.
Irreparable damage may
occur if the incorrect is voltage supplied.
Getting A Hold of Us
If you need more information, or something goes wrong, please
contact us at
www.vaporflame.net
. We love talking shop and will be happy to troubleshoot any
challenges with you. Really!
Disclaimer: The information and specifications contained in this document are subject
to change without notice. VaporFlame Inc. assumes no responsibility or liability for any errors or
omissions that may appear in this user manual. VaporFlame Inc. reserves the right to update the
existing document or to create a new document to correct any errors or omissions at any time.
You can download the latest version of this document from www.vaporflame.net
.
Page of
3
11
Rev. 1.0 4/21
