NEES-04
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
T: 00352/26908036 – F: 00352/26908040
SAFETY INSTRUCTIONS
SPECIFICATIONS
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE
Warning!
The instructions and warnings contained in this manual should be read and understood before using or
operating this equipment. Do not allow anyone to use or operate this equipment until they have read this
manual and have developed a thorough understanding of how this equipment works. Failure to observe
any of the instructions contained in the manual could result in severe personal injury to the user or
bystanders, or cause damage to the equipment and property. Keep this manual in a convenient and safe
place for future reference.
Whilst every effort has been made to ensure accuracy of information contained in this manual, our policy
of continuous improvement determines the right to make modifications without prior warning.
SAFETY OPERATING INSTRUCTIONS
•
Before using the stand ensure it is in sound condition, and good working order.
•
Replace or repair damaged parts.
Use recommended parts only. Non-authorised parts may be
dangerous and will invalidate the warranty.
•
Keep the stand clean for best and safest performance.
•
Locate the stand in an adequate working area for its function, keep area clean and tidy and free from
unrelated materials, and ensure there is adequate lighting.
•
Use on a firm, level surface capable of sustaining the stand and the load.
•
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
•
Ensure all non-essential persons keep a safe distance whilst the stand is in use.
•
Lock mounting plate in position before fixing a load, and ensure the load is centred and securely
mounted on the locking plate.
•
Ensure the Stand and the load is stable.
•
To move a loaded stand, push it from the load side, above the two fixed wheels. DO NOT move the
stand from the castor end and never pull the stand towards yourself.
•
Also ensure surface over which the stand is to travel is strong enough to take the stand load and that it
is not cracked, uneven or obstructed.
•
DO NOT operate unit if damaged.
•
DO NOT allow untrained persons to operate the stand.
•
DO NOT exceed the rated capacity of 680 Kg.
DANGER: DO NOT work under an engine mounted on the stand
The Engine Stand accepts a wide variety of engines and transmissions.
The head swivels 360º for accessibility to all parts of the engine. It has fully adjustable mounting arms. Ball
bearing swivel castors provide excellent manoeuvrability.
Content:
•
The engine mount
•
The manual
•
4 castors
NEES-04 Technical Specifications:
•
Capacity: 680Kg
•
Product height mounted: 890mm
•
Color: red
•
Weight : 31Kg
