5
Important!
Before
lighting up your
Varde Stove
for the
first time, we recommend that you read these
instructions carefully and contact your local
stove vendor or building authoorities to inquire
about existing regulations regarding the
intallation of stoves. Please follow these
regulations closely.
Inspection of installation
It is very important that the installation be
inspected by a qualified chimney sweeper
before the stove is in used for the first time.
Regulations
All local regulations as well as National and
European, should be adhered to when
installing your stove.
All Varde Ovne stoves are closed fireplaces.
The stove is designed for intermittent
combustion and can be connected to a
chimney used by other fireplaces, as long as
the appropriate rules and regulations are
adhered to.
This
Varde Stove
Has passed the
Danish /European Standard DS/EN 13240
and the German (DINplus) test , and have
thereby proved to be a environmentally friendly
product.
Proffesional installation
We recommend that you consult with the
dealer where you purchased the stove or an
other competent installer, as there may be
specific things to consider during the
installation. You should also reseive the
applicable rules for installing the stove and
follow them.
Please Note!
You are by law required to register your stove at the local chimney-sweeper
.
Until installation keep the stove dry and not to cold. The stove cannot stand moisture.
That an existing chimney, not necessarily is effective enough for a new modern stove.
Vermiculite is a very porous material, therefore handle with care. When refilling the stove, put
the wood carefully, use the glove.
EC declaration of confirmaty.
MANUFACTURER
Name:
Varde Ovne A/S
Adress
Kongevej 246, DK-6510 Gram, Danmark
Product
Varde Thurø 11
Product type
Thurø
Type code
Heating stove, suitable for intermittent combustion
Standard
Costruction products (89/106/EC/) standard used EN 13240
Application
Residential Heating
Fuel
Wood
Special conditions
Non
CE-Markning
Issued
2012
Nominal Output
6 kW
Fuel type
Wood
Fluegas temperature
270
°
C
Efficiency
78 %
Co-release
0,2 %
Jan Meldgaard
CEO
Varde Ovne
