19
ENglIsh
Before replacing the vermiculite plates and the base slab, adjust the fire
place insert until it is straight and flush with the front of the fireplace.
|
Adjust the four screws in the bottom of the insert, as shown.
|
A spirit level may be used to ensure that the insert is level.
|
You can also fasten the insert to the bottom of the fireplace with a
couple of frame screws, concrete screws or the like, via the two large
holes in the base.
7
Adjustment
8
Completion
The fireplace insert must be reassembled before it is ready for use.
|
Replace the vermiculite plates and the base slab in the insert, in the
order shown.
|
Fill in the top 23 cm with fireplace mortar to fix the tubing in place.
Your fireplace insert is now ready for use.
See the sections on Lighting and Stoking.
1
2
3
Summary of Contents for FRONT-LINE 55
Page 2: ...2 In Line 55...
