www.vareximaging.com
1
1313DXT-I/1515DXT-I/2520DX-I/3030DX-I X-ray Detectors
U
SER
M
ANUAL
1.0
Scope
This document describes the following associated digital X-ray detectors:
•
1313DXT-I
•
1515DXT-I
•
2520DX-I
•
3030DX-I
All applicable mechanical, electronic, and software interfaces are described.
2.0
Contraindication
There are no contraindication situations.
3.0
Intended Use
Varex Imaging fluoroscopic digital X-ray detectors and their accessories are designed to be
integrated into systems by X-ray system manufacturers. Manufacturers are responsible for
qualifying, validating, and certifying their products for their intended uses and meeting all
applicable regulatory requirements.
Final application and intended use is determined by the X-ray system manufacturer and is based
on the completed X-ray system design. It is the responsibility of the X-ray system manufacturer
to confirm safety, efficacy and compliance of the X-ray system intended for use, inclusive of the
detector. The Digital Radiography Software referred to in this manual is intended to be used for
development, testing, and maintenance purposes only.
4.0
Audience
This document is for users of the X-ray detector, X-ray System Manufacturers, and X-ray System
Installers who are responsible for installing the X-ray Detector into an X-ray System.
5.0
Abbreviations
Note
The detectors are designed to be integrated into a complete X-ray system by
a qualified system integrator.
Table 1
Abbreviations
Abbreviations
Descriptions
API
Application Program Interface
a-Si
Amorphous Silicon
CSI
Cesium Iodide
