1313DXT-I/1515DXT-I/2520DX-I/3030DX-I X-ray Detectors
34
www.vareximaging.com
U
SER
M
ANUAL
10.4
ViVA Mode and System Settings
Perform the following steps to adjust the ViVA mode settings.
1
Ensure that the
link
to the VCP is established. See step 4 of
.
2
Click on the
Mode Drop Down Menu
and click the
desired mode
.
Figure 32
Mode Drop Down Menu
3
Click
Acquisition
from the menu bar and click on
Mode Settings
to adjust mode
settings.
Figure 33
Mode Settings selection in Acquisition menu
4
Frame Rate settings and number of frames taken are changeable. If
User Sync
is checked, an
external trigger
which determines the frame rate must be supplied.
