C
HAPTER
3. M
AINTENANCE
P
ROCEDURES
3-17
02.9631.0010
CONFIDENTIAL
15 Jan 98
Test X03 - Beam Iris
When test X03 is executed, the beam iris is cycled open and closed.
Failure is indicated if the beam iris will not move or travels improperly.
Parameter settings for test X03 are as follows:
Parameter Test setting
Test Results
003
2 seconds from full open to full close
103
same as above
203
4 seconds from full open to full close
303
6 seconds from full open to full close
403
10 seconds from full open to full close
503
20 seconds from full open to full close
603
1 minute from full open to full close
703
5 minutes from full open to full close
803
open
903
closed
Test X04 - Lens Assembly
When test X04 is executed, the lens is cycled fully in and out. Failure is
indicated if the lens will not move or travels improperly.
Parameter settings for test X04 are as follows:
Parameter Test setting
Test Results
004
2 seconds from full out to full in
104
same as above
204
4 seconds from full out to full in
304
6 seconds from full out to full in
404
10 seconds from full out to full in
504
20 seconds from full out to full in
604
1 minute from full out to full in
704
5 minutes from full out to full in
804
open
904
closed
