M
AINTENANCE
:
2
0 2 . 9 6 8 3 . 0 0 1 0 0
2 5 M a r c h 2 0 1 1
41
Tilt Motor Assembly Replacement
Parts:
21.9685.0540
1 EA
ASSY, PAN/TILT MOTOR
Tools:
•
#2 Phillips Screwdriver
•
Diagonal Cutters
WARNING:
Remove power from luminaire before performing maintenance.
To remove and replace tilt motor assembly:
Step
1. Disconnect luminaire AC input cable from power source.
Step
2. Remove display side yoke cover by removing four 6-32x3/8" LG PTB screws.
Step
3. Remove Display PCB and Main Control PCB by following procedures
“Display
PCB Replacement” on page 36
and
“Main Control PCB/Fan Assembly
Replacement” on page 37
.
Step
4. Remove 4 x 6-32 x 3/8" PFB screws (two each side of yoke) that hold Top Cover
Louver Plate and remove plate.
Step
5. Disconnect wiring from motor and encoder PCB.
Step
6. Cut wire tie connecting wiring to yoke arm.
Step
7. Loosen (do NOT remove) four 8-32x7/16" PPZ screws that mount Pan/Tilt motor
assembly to Tilt Motor Slide Plate.
Figure 19: Tilt Motor Assembly Replacement
Spring
Tilt Motor Slide Plate
8-32x7/16" PPZ (x4)
Some components not shown for clarity.
NOTE:
Tilt Motor Assembly
Tilt Motor
Assembly
Yoke Arm Cover
8-32x7/16" PPZ
8-32x7/16" PPZ
Summary of Contents for VL550
