VARI-590H
Always swith off the engine while cleaning the working space.
Always tip the machine backwards on its handlebars only. Always be especially careful when moving in the space
under a lifted machine. Secure the cutter from spontaneous movement!
Particular precautions must be taken when cleaning the working space. The cutting blade is sharp. Use work
gloves, or other convenient objects, e.g. a piece of branch, for cleaning the machine.
Before continuing any activity on the machine or its surroundings, always wait until the cutting blade stops.
This lawnmower can be retrofitted according to using need, so-called
Function 4 in 1
. From lawnmower with rear discharge to
mulching mower or to side-discharge mower.
➢
When cutting on slopes it is best to move along the slope contour line.
Keep the slope accessibility (
)!
2.4.3.2.1 Function 1 – mowing with the grass bag
Hitch the assembled grass bag on the lawnmower
Pict.
> 5
and
> 6
. Emptying and cleaning the bag, make sure it is clean and
ensure its meshwork is ventilated.
Always switch off the engine when cleaning the rear discharge chute! Do not reach wiht hands to the chute until
the cutting blade stops!
Switch off the engine before remowing the grass bag.
Adjust the mower only with a stopped engine and standstill blade.
➢
If the mower was used for mulching or side-discharge mowing before mowing with the grass bag, remove the mulching
wedge and discharge channel for side discharge. Lift rear cover and remowe the mulching wedge by unlocking on the
chassis and removing it
Pict.
> 3
. Lift side cover and remove discharge channel. The side flap automatically closes the
discharge opening on the housing by means of spring force.
➢
Regularly clean the sideward flap and discharge opening from grass and stuck dirt.
2.4.3.2.2 Function 2 – rear-discharge mowing
Mowe with remowed grass bag, the cover of rear discharge chute
10
on
Pict.
lays the cutt grass into rows behind the lawnmower.
Always switch off the engine when cleaning the rear discharge chute! Do not reach wiht hands to the chute until
the cutting blade stops!
Do not lift the cover of rear disharge chute while mowing – danger of injury of the operator.
Adjust the mower only with a stopped engine and standstill blade.
➢
If the mower was used for mulching or side-discharge mowing before mowing with the grass bag, remove the mulching
wedge and discharge channel for side discharge. Lift rear cover and remowe the mulching wedge by unlocking on the
chassis and removing it
Pict.
> 3
. Lift side cover and remove discharge channel. The side flap automatically closes the
discharge opening on the housing by means of spring force.
➢
Regularly clean the sideward flap and discharge opening from grass and stuck dirt.
2.4.3.2.3 Function 3 – mulching
When mulching, the grass is cut in one working step, then finely chopped and returned to the grass strip as natural fertilizer. Mulching is
practised without the grass bag with the help of mulching wedge.
Lift the rear cover and push the mulching wedge into the rear discharge channel
Pict.
> 1
. Lock the mulching wedge with the
chassis and the nose on the bottom side of mulching wedge grip must snap into the opening on the chassis
> 2
and lower the rear cover
again. After termination the mulching remowe the mulching wedge. Lift rear cover and remove the mulching wedge by unlocking on the
chassis and removing it
> 3
.
Hints for mulching:
•
Use a sharp cutting blade
•
Regular cut
•
Do not mow wet grass
•
Set magimal engine revolutions
•
Only move at walking pace
•
Regularly clean mulching wedge, chassis inner side and cutting blade
Adjust the mower only with a stopped engine and standstill blade.
22
R
ev
iz
e
0
5
/2
0
1
5
