2.7 Picture appendix
The picture appendix is common for all the language versions. You can find it at the end of this manual in the Chapter
Pictures
.
1) Place for
holding at the back
(frame U-tube)
2) Screen holder
3) Dismounted disc cover
4) Place for
holding the machine at the front
(cutting disc)
5) Tilted handlebars in the package (transport position)
6) Bag
7) Side and rear screens
Fig. 1: Unwrapping the machine
1) Disc drive clutch level
2) Wheel drive clutch lever
3) Handlebars fastening bolt
4) Accelerator lever (gas lever)
5) Side screen fastening bolt
6) Side screen
7) Cutting disc
8) Blades (4 pieces)
9) Cover between wheels
10) Disc cover
11) Frame - tube
12) Handle
13) Engine
14) Fuel tank lid
15) Wheel
16) Gearbox cover
Fig.2: Description of the main parts
Position
STOP
:
Engine is not running (position ‘1’)
➢
Used for turning off the running engine.
➢
Putting the machine out of service.
➢
Refuelling
➢
Machine transport
Position
MIN
:
Engine is running at idle. (position „2“ turtle)
➢
Short work break
Position
MAX
:
Engine is running at maximum rpm. (position „3“ hare)
➢
Working position
Position
CHOKE
:
Engine is running. (position „4“)
➢
Cold engine start
Fig. 3: Positions of accelerator lever
1) Upper disc
2) Blade
3) Bolt
4) Washer
5) Ring
6) Nut
Fig. 5: Mounting of cutting blade on the upper disc
Fig. 4: Cutting width
Fig. 7: Lubricating point
Fig. 6: Lubricating point
Fig. 13: Lubricating point
Fig. 8: Lubricating point
Fig. 9: Lubricating point
Fig.10: Adjustment of the wheel drive tightening pulleys
Fig. 11: Disc drive clutch lever – brake
Fig. 13: V-belt tracks
Fig. 14: 1st speed - slow (turtle)
Fig. 15: 2nd speed - fast (hare)
Fig. 16: Information label - speed changing (on the gearbox cover)
Fig. 17: Safety pictogram – Combined sticker
Location on the machine
Fig. 18: Safety pictogram - Arrow direction of turning
Location on the machine
Fig. 19: Safety pictogram - Machine wheel drive
Location on the machine
Fig. 20: Safety pictogram - Starting up the disc
Location on the machine
1) Upper gearbox cover
2) Lower gearbox cover
3) Plastic nut
4) V-belt of cutting disc drive
5) V-belt of gearbox drive
6) V-belt of wheel axle drive
7) Driving double-pulley (on the gearbox)
8) Driven double-pulley (on the axle)
Fig. 12: Disassembly of the gearbox covers
24
Summary of Contents for BDR-620
