F-530.1
26
The following procedure is recommended for machine liquidation after the end of its
service life:
1. Dismount all parts from the machine that still can be used.
2. Dismount the plastic machine parts and the parts of non-ferrous metals. The stripped
machine remainder and the dismounted parts are to be liquidated according to Waste Law
No. 185/2001 Gaz. (and its possible further amendments) and with respect to the decrees
of local town or municipal authorities.
7 Instructions for ordering spare parts
The following data are to be used for easier identification when ordering the spare parts:
1. Machine type, engine type, machine serial number and year of manufacture;
2. Ordering number given by manufacturer and its name in the component list;
3. Number of ordered pieces separately for each item;
4. Precise address, telephone number, fax number or e-mail address;
5. If you are not certain about the correct identification of the component, send the damaged
component either to the nearest service shop or to the manufacturer;
6. All components should be ordered in the nearest service shop or at your dealer’s.
In the case of any confusions concerning the spare parts or technical issues, the VARI a.s.
commercial, customer-service or technical departments are prepared to answer all your
inquiries.
8 Contact to manufacturer
VARI,a.s.
telefon:
(+420) 325 607 111
Opolanská 350
fax:
(+420) 325 637 550
Libice nad Cidlinou
(+420) 325 607 264
CZECH REPUBLIC
e-mail:
vari@vari.cz
289 07
internet:
www.vari.cz
9 List of components
Summary of Contents for F-530.1
