F-550
See the picture at the chapter
1)
Nuts
2)
Blade carrier
3)
Work tool - blade
4)
Screw
5)
Center screw
1)
Gearbox cover
2)
Bottom gearbox cover
3)
Plastic nut
4)
Foot / tab
Fig. 5: Cutting width
Fig. 6: Work tool mounting
Fig. 7: Rear covers
Fig. 8: Cutting height
Fig. 9: Higher speed
Fig. 10: Lower speed
Fig. 11: Drive clutch and brake
Fig. 12: Bowden cable adjustment I
Fig. 13: Wheel drive clutch
Fig. 14: Bowden cable adjustment II
Fig. 15: Gearbox belt
Fig. 16: Belt route
<<< Position on machine
Fig. 17: Sticker – Forbidden Area
Fig. 19: Combined sticker
Position on machine >>>
Fig. 18: Sticker – direction of turning
Position on machine >>>
Fig. 20: Sticker
Position on machine >>>
Fig. 21: Sticker
Fig. 22: Sticker – speed selection
31
02
/2
01
3
