DS-520 Líza
DS-520H Líza
10
5.2 Putting into operation.
,
The machine is delivered without operating engine fillings!
,
Read the instruction for engine use carefully! You can prevent a possible damage to
the engine.
1. Fill the engine with the prescribed grades and volumes of oil and petrol.
2. Move the accelerator lever into the front position (“MAX” or “CHOKE”, according to
the type of the engine). By pulling on the manual starter start the engine (see guidelines
for engine use).
3. Let the new or cold engine running for about 30 seconds.
,
Don’t leave the machine alone when doing this!
Bowden cables to be attached to
handlebars by tightening tapes
Figure 2: Machine assembly
Plastic rosette fixing
the side apron in the
frame
Side apron
Summary of Contents for Liza DS-520
