DS-520 Líza
DS-520H Líza
6
b) Work with the machine should be interrupted after max. 20 minutes for a
minimum time of 10 minutes. During these breaks, the machine operator must not
be exposed to the impact of another source of noise or vibrations.
,
Machine operators should use working aids authorized to CSN EN 166 or CSN EN 1731
(tight-fitting garments, sturdy shoes, working gloves and protection glasses). Keep a safe
distance given by the handle.
,
Don’t start the engine in enclosed spaces! Pay increased attention when handling the
machine since the exhaust silencer remains hot after the engine has been switched off;
make sure there are no leakages and spills on engine parts when refuelling. If they
happen to occur, dry out the stained parts or wait until the petrol evaporates.
,
When the machine is in operation, all other persons (children in particular) and animals
have to be outside the machine’s working space. The machine operator can continue
working only after they have been shown out to a safe distance.
,
Removal of any protective equipment and machine casings is prohibited.
,
Safe slope accessibility of the machine is 10°. Maximum engine tilting at work is 20° for
a longer time and 30° for a shorter time (up to 1 minute).
,
All kinds of machine repair, adjustment, lubrication and cleaning are to be made with the
machine switched off and spark plug cable disconnected.
3.2 Safety pictographs.
The user is obliged to maintain the pictographs on the machine legible and to provide
for their replacement in the case of damage. There are self-stickers on the machine with the
following safety pictographs:
The pictographs are located in the rear part of the machine frame.
1. Prior to the machine use, study the Instructions for use.
2. For machine maintenance, disconnect the cable from the spark plug.
3. Putting one’s hands or stepping into the working space of the cutting blade is prohibited.
Danger of injury.
4. Keep a safe distance from the machine at work. Danger of injury by flying material
fragments and objects.
1
2
3
4
Summary of Contents for Liza DS-520
