TRIMMER-50
TRIMMER-60
10
4.3
Technical description of the machine
The base of the machine is a rigid frame on which a combustion engine is placed.
The machine is equipped with covers against flying cut material. A screen of plastic
canvas placed between the wheels prevents flying chips. Tubular handlebars have an
ergonomic shape and their height is adjustable. They are equipped with a control
horizontal bar of string head drive clutch, lever for axle tilt arrestment and accelerator
lever. The string head is driven through a V-belt. The drive is switched on by the
tension pulley via the control horizontal bar. Working tool is a string head with two
strings, whose design makes it possible to adjust the cutting height by realigning
distance rings. The strings are fastened by passing them through the string holder and
tightening. Other working attachments that can be used in place of the string head are
saw blade and mowing disks (with 3-4 teeth), which are to be installed on the machine
through the friction overunning clutch onto the steel hub. The mower axle can be tipped
to sides (left, right) which facilitates final trimming near fences and walls. Arrestment
of side d which a gear-box is tipping is controlled by a lever located on the handlebars.
The wheels have plastic felloes with heavy-duty solid rubber tyres.
Ovládací hrazda spojky pohonu
Ř
eza
č
struny
Ochranná plenta
Pá
č
ka aretace nápravy
Pá
č
ka akcelerátoru
Ř
ídítka
Kloub nastavení
ř
idítek
Pojezdová kola
Krytování
