TRIMMER-50
TRIMMER-60
17
5.7
Advised accessories
A
Guide wheel
(
Order.No. 3878
) is advised to improve the leading of the string
head above the terrain. A set of
Disk holder
(
Order.No. 3881
) is recommended for
greater applicability of the machine to join the mowing disks or saw blades. The
specification of disks see chapter
Technical specifications
.
5.7.1
Guide wheel
The guide wheel serves for a better guidance of the machine at cutting flat surfaces
with low stand heights and without hidden solid objects. It is to be inserted into the
holder in the front part of the machine and secured with the bolt.
5.7.2
Mowing disks and saw blades
5.7.2.1
Assembling the disks
! Be careful when exchanging the working tools. The cutting edges are sharp.
Protect your hands with the working gloves.
! The exchange should always be made with the engine switched off and the spark
plug cable disconnected.
1.
Loosen and unscrew the bolt holding the string head and dismount the string head
including the distance rings.
2.
Insert the steel hub, friction washer, mowing disk or saw blade and fillers according
to Figure 12.
3.
Tighten the bolt with the barrel spanner No. 16. Tightening moment is 15 N.m.
When loosening and tightening the bolt, put on the round iron (ZNA
Č
KA!) 6 mm or
the imbus wrench No. 6 through the holder on the hub and tube on the machine frame so
that the disk does not turn over.
Figure 12
Hub
Friction washer
Belleville washer
Packing piece-lens
Filler
Bolt
Mowing
disk or saw
blade
