TRIMMER-50
TRIMMER-60
8
3.3
Maximum values of noise and vibrations.
Maximum values of noise and vibrations as measured by AO-206 SZZPLS Praha
Test report
No. 15 141 of 12 October 1999
No. 15 145 of 27 October 1999
No. 15 142 of 13 October 1999
No. 15 146 of 2 November 1999
Product
TRIMMER 50
TRIMMER 60
Acoustic output of the
machine
L
WA
[dB] 108.5 L
WA
[dB]
112
Acoustic pressure level
L
pAeq,T
[dB]
93.5
L
pAeq,T
[dB]
97.0
Weighted effective value
of transmissions
transmitted onto
operator’s hands (vector
sum of rectilinear
vibrations on ind. axes-
Testing method to CSN
EN 1033)
a [m.sec
-2
] 6.3 a
[m.sec
-2
] 8.1
Acoustic output of the
machine
L
WA
[dB] 108.5 L
WA
[dB]
112
Min. exposition break
x [min]
10
x [min]
10
Max. operator’s
exposition per shift
y
[min] 90 y
[min] 60
Exception issued by the Main hygienist of the Czech Republic for the machine use.
(Valid only for the territory of the Czech Republic)
Regarding the fact that the maximum permitted values of noise and vibrations at the
operator’s working place are exceeded, the product cannot be in a long-term use.
1)
Work with the machine must be regularly interrupted with breaks of at least “x“
minutes (see values in the table) and the total time of this work must not exceed “y“
minutes (see values in the table) per worker and shift. Work procedures must be
modified so that the breaks leading to the interruption of exposition are logical.
2)
At the time of these breaks which are required for health protection reasons, the
operator must not be exposed to accessive noise and vibrations.
3)
In the case of professional work (or in the case that the maximum exposition time is
exceeded), a proposal must be submitted to the appropriate competent authority for
classification of this work as hazardous in terms of noise and vibrations.
4
Use, technical specification and technical description of the machine
4.1
Use of the machine
The string mower is designed for cutting grass stands which cannot be mown by
another type of cutting machine due to a risk of machine damage by solid objects
occurring in the stand, or for final trimming of grass surfaces where other machines
cannot be used. The string head can be replaced with a saw blade or with other types of
cutting saw disks used in attached brush cutters. Another recommended attachment is a
guide wheel.
! Engagement width has to be always accommodated to the density of the mown
stand !
