Varian 900-LC Series Liquid Chromatograph
reboot the LC system communications card. Click
Close
when the initialization is complete.
✒
Note
If an IP address still does not appear, contact your IT department
to check your network connections. The LC systems must be on
the same gateway/subnet as the acquisition server or stand-alone
PC configuration and be connected to the provided Ethernet
switch.
(b)
When Use a static IP address is chosen, enter in the IP
address, Subnet mask, and Default gateway for the LC
system. The LC systems must be on the same
gateway/subnet as the acquisition server or stand-alone PC
configuration and be connected to the provided Ethernet
switch.
8.
Click
Create
.
9.
Click
OK
when the message confirming the system creation
comes up.
10.
Create up to three more systems or click
Close
to exit the
installer.
2.2.4
Delete a System
If the system needs to be renamed or the IP address changed you
will need to delete the existing system and recreate it.
To delete a system:
1. Open Galaxie Configuration Manager.
2. Click the Windows® Start button and choose
Programs
>
Galaxie™ > Galaxie™ Configuration Manager
.
3. Log in to Galaxie Configuration Manager.
4.
Click
Systems
in the upper left side of the window.
5.
Right click the system to be deleted and choose
Delete
.
6.
Click
Communication engine configuration
on the lower left
side of the window.
7.
Highlight the first line with the system name to be deleted and
then click
Remove
on the upper right side of the window.
8.
Repeat the previous step for all lines with the system name to be
deleted.
9.
Click
Apply
.
38
Publication date: December 2007
