DESC:
PAGE:
REV
9 of 10
Assy, Chassis, Twin Towers
3
PREPARED BY: Sax Makthepharack REVISED BY:
CONTROL: INDUSTRIAL ENGINEERING
REV. DATE:
SHOWN
-
04 - 06 - 00
Michael Slaughter
DOC: 03-925794-01
12-901161-00
03-925565-01
03-925314-01
21-128961-00
17-699907-00
03-925229-01
DUCT, VENT (*)
03-925332-01
PARTITION, VENT (*)
RIVET, 1/8 X 1/8 AL/AL
SCR, SEM, 6-32 X 3/8
03-925306-01
3800 VENT MOTOR
BEARING, NYLON SLEEVE
ASSY, VENT DOOR
COUPLING, FLEXIBLE
NOTES:
1. WHEN ASSEMBLE THE FLEXIBLE COUPLING
(03-925565-01) ONTO THE VENT DOOR ASSEMBLY
(03-925314-01) SHAFT, MAKE SURE IS FLUSH
AGAINST SHOULDER OF SHAFT. TIGHTEN
SCREW ON COUPLING TO 10 IN-LB TORQUE.
2. WHEN INSTALLING VENT MOTOR INTO THE
FLEXIBLE COUPLING, MAKE SURE MOTOR
SHAFT END TOUCHES VENT SHAFT END. PRIOR
TO TIGHTEN THE SCREW ON COUPLING CHECK
TO MAKE SURE THE SCREW IS ON THE FLAT
SURFACE OF THE VENT MOTOR SHAFT. TIGHTEN
SCREW ON COUPLING TO 10 LB-LB TORQUE.
