Reference
Varian, Inc.
User Manual Micro-GC
Page 71
SHIPPING INSTRUCTIONS
If your Micro-GC for any reason must be sent back to the factory, it is very
important to follow these additional shipping preparation instructions:
1. Add all the vent caps at the back of the Micro-GC.
2. Always include the power supply.
3. Include, if used, the inlet filter(s).
CLEANING INSTRUCTIONS
To keep the Micro-GC surface clean, refer to the remarks given below:
Switch the Micro-GC off.
Remove the power cable.
Put protection plugs on the sample and carrier gas inlets.
Put protection plugs on the Column vents.
Use a soft (no hard or abrasive) brush to carefully brush away all dust and
dirt.
If the outer case is dirty (never clean the inside!) clean it with a soft, clean
cloth dampened with mild detergent.
Never use alcohol or thinners to clean the Micro-GC, these chemicals can
damage the case.
Be careful not to get water on the electronic components.
Do not use compressed air to clean.
DISPOSAL INSTRUCTIONS
When the lifetime of the Micro-GC or parts of it has reached the end of its
useful life, disposal must be carried out in accordance with all (environment)
regulations applicable in your country.
Summary of Contents for Micro-GC 490-GC
Page 8: ......
Page 72: ...Reference Page 64 User Manual Micro GC Varian Inc...
