96
85-102113-00:1
6. Lift up the silver safety interlock latch on the right and
remove the lamp, holding onto the thumbscrews (refer to
Figure 27).
Figure 27 Lifting the silver safety interlock latch and removing the lamp
7. Remove the lamp assembly and discard. No part of the old
assembly can be re-used.
Installing the new lamp
NOTE:
You should wear gloves when replacing the lamp to prevent any oil or
other material from getting on the lamp glass envelope. It is important
that you never touch the glass on the lamp with your bare hands, as this
can cause the lamp to fail prematurely or even crack.
1. Lift the silver safety interlock latch, and carefully insert the
lamp into the lamp housing.
2. Screw in the two thumbscrews.
3. Connect the 3-way connector into the socket.
4. Re-engage the safety interlock latch by sliding it down.
5. Replace the front panel and screw in the captive screw in the
top left corner of the panel.
