46
85-102113-00:1
Receiving inspection
Receiving inspection instructions are detailed in the
Pre-installation manual that you will have received before delivery
of the detector.
In summary, before accepting delivery, you must inspect the
package externally for signs of obvious damage; for example,
crushed corners, forklift punctures, tears or cuts and water
stains. A further inspection must be made for concealed damage,
within the time limit stated in the terms and conditions of
carriage. Any shipping damage must be reported to the carrier,
and to your Varian Sales Office.
Unpacking
1. Ensure you have enough room on the bench to put the
ProStar 335 detector once it is removed from the box.
2. Carefully unpack the unit from the shipping carton and
place it on the bench. This is best done by two people.
WARNING
The ProStar 335 detector weighs in excess of 15 kg. Avoid back strain or injury by
following all precautions for lifting heavy objects.
3. Make sure to check carefully for all miscellaneous
components that might be contained in the inner
compartments.
NOTE:
The ProStar 335 detector is a sensitive instrument and should always be
handled with the degree of care appropriate for laboratory
instrumentation.
Tip: Keep the shipping carton, as it provides excellent protection
if you have to transport or store the detector in the future.
