I
NSTALLATION
ProStar 335 Photodiode Array Detector
57
Synchronization signals
The synchronization signals at P9 and J10 are used to
synchronize the operation of a group of instruments that are not
interfaced to a Star or Galaxie Workstation.
The synchronization signals come in four pairs and define how
the detector will operate in a HPLC system. These signals are
important for controlling timing and synchronization of the
detector with the other devices in the system. Synchronization
signals are closely tied to the detector states and transitions. P9
and J10 pin designations are shown in Figure 7.
Figure 7 Pin designations for J10 and P9
P9 provides connections when the ProStar 335 detector acts as
a ‘slave’ and receives control from another module. J10 provides
connections when the ProStar 335 acts as a ‘master’ and sends
control to another device.
