66
85-102113-00:1
Configuring TCP/IP Parameters for a Company Network
The following three steps assume you have completed steps 1
through 6 from the procedure ‘Installing and Configuring the
Ethernet Card in Your PC’.
1. Click
Internet Protocol (TCP/IP) in the network component
list, and then click the Properties button. The TCP/IP
Properties dialog box is displayed.
2. Select
Specify an IP address, and enter the IP address to
be used by this Workstation. (Alternatively, your Network
Administrator may instruct you to obtain an IP address
automatically by selecting Obtain an IP address
automatically.) For the appropriate address, contact your
Network Administrator (or whoever assigns IP addresses in
your network). Note that each Workstation PC must have
a unique IP address.
3. Enter the appropriate Subnet Mask to be used with this IP
address.
4. Contact your Network Administrator to see what the
appropriate settings are for your Gateway, and whether
Domain Name Server (DNS) and WINS Configuration are
needed.
Your Network Administrator may also instruct you to specify
parameters on the Bindings and Advanced tabs.
5. Click
OK. You will need to reboot Windows
®
for the changes
to take effect.
