background image

 

Varian, Inc. 
2700 Mitchell Drive 
Walnut Creek, CA 94598 USA 

 

Saturn

®

 2000 GC/MS

 

Pre-Installation Instructions

 

The information provided here will help you identify and prepare a suitable installation site for 
your Saturn GC/MS. After you have prepared the site, and your Saturn GC/MS has been 
delivered, please contact your local Varian, Inc. office to schedule your installation. 

For Saturn 2100 systems, refer to these instructions plus the 3900 GC Pre-Installation 
Instructions. For other Saturn systems, refer to these instructions plus the CP-3800 GC  
Pre-Installation Instructions.  

The Varian Saturn GC/MS has been designed to operate reliably under carefully controlled 
environmental conditions. It is your responsibility to provide a suitable location, power source, 
and operating environment. Operating or maintaining a system in operational conditions outside 
of the power and operating environment limits described below could cause failures of many 
types. The repair of such failures is specifically excluded from the Warranty and Service 
contract conditions. 
 

CAUTION

 

All phases of the installation site preparation must conform to local safety, 
electrical, and building codes. These codes take precedence over any 
recommendations in these instructions, and compliance to them is the 
responsibility of the customer. 

Contents

 

Space and Weight Requirements............................................................ 2

 

Power Requirements ............................................................................... 3

 

Operating Environment............................................................................ 5

 

Temperature/Humidity ...................................................................... 5

 

Particulate Matter.............................................................................. 6

 

Vibration............................................................................................ 6

 

Exhaust System................................................................................ 6

 

Gas Requirements................................................................................... 6

 

GC Carrier Gases ............................................................................. 6

 

CI Reagent Gases (with CI option only) ........................................... 6

 

Other Gases ..................................................................................... 7

 

Gas Lines.......................................................................................... 7

 

Capillary Columns ................................................................................... 7

 

Solvents................................................................................................... 7

 

Network Requirements ............................................................................ 7

 

Computer/Printer Requirements.............................................................. 7

 

Specifications.................................................................................... 7

 

Qualified PCs.................................................................................... 8

 

Qualified Printers .............................................................................. 8

 

Inspection ................................................................................................ 8

 

Unpacking and Installation ...................................................................... 9

 

Parts and Supplies .................................................................................. 9

 

Preventive Maintenance .......................................................................... 9

 

Trademark Acknowledgment................................................................... 9

 

03-914629-00:7 

1

 

of 9 

Saturn 2000 GC/MS Pre-installation Instructions

 

Summary of Contents for Saturn 2000 GC/MS










Reviews: