INSTRUCTIONS FOR USE
67 87-900-940-01 (
F
)
Controller 969-9437 and 969-9537 Rear Panel
USE PROCEDURE
Controller Startup
To startup the controller plug the power cable into a
suitable power source.
Starting the Pump
To start the pump press the START pushbutton on the
controller front panel.
Pump Shutdown
To shutdown the pump press the STOP pushbutton on
the controller front panel.
MAINTENANCE
The Turbo-V 301 Rack series controller does not
require any maintenance. Any work performed on the
controller must be carried out by authorized personnel.
1. Logic input signals connectors (mating connector supplied
with link).
2. Logic output signals connector and pump current monitor.
3. Power output connector (24 Vdc for pump cooling fan).
4. Pump
cord.
5. Controller power entry module consisting of mains fuses,
voltage change over, mains socket and EMC filter.
6. Power output connector (120 Vac) for vent device,
forepump contactor coils, etc.
7. Provision for RS232 communication port connector
(provided as an option).
Summary of Contents for Turbo-V 301
Page 2: ...Turbo V 301 Rack Controller...
Page 3: ......
