VS Series Leak Detector Wireless Remote
2-16
DRAFT 11
/2/06
Figure 2-24 Choose LD Screen
7. Press the + or - hard buttons and choose from the leak detector list (e.g. channels # 8 or
#12).
8. Press
Enter
and the
Link
screen appears (Figure 2-25) for one to three seconds and then
the
Home
screen reappears.
Figure 2-25 Link Screen
2.2.5.3 MAC Address Verification
Use this screen to see the MAC addresses of both the leak detector and the wireless remote
that is communicating with the leak detector. If the MAC address of the previous leak
detector is unknown, the display leaves the leak detector MAC address blank.
To view and verify the MAC addresses from the
Home
screen:
1. Press the
,
, + or - hard buttons to highlight the
Home
screen Tools icon
and press
Enter
and the
Speaker Volume
screen appears (Figure 2-26).
Figure 2-26 Speaker Volume Setup Screen