Page 21
PRIMARY FUNCTIONS
MAIN SET POINT TEMPERATURE
The main set point establishes the target
temperature in the building. This value is used
as the reference point for other temperature
settings. The main set point temperature is
adjusted in 0.5 degree increments from a
minimum setting of 42.0°F (5.5°C) to a
maximum setting of 111°F (44.0°C).
Adjusting the main set point temperature:
•
rotate the Selector dial to position (1),
•
rotate the Adjustor dial counterclockwise to
decrease the temperature setting,
clockwise to increase it.
The main set point temperature is displayed on
the front panel.
CHAPTER 3 - USER’S GUIDE
Note: The reduction per day feature (primary func-
tion 9) must be off to adjust the main set point.
www.monitrol.com
