IC-68
ND
INSTALLATION GUIDE
15
7.6 IC-68
ND
Compatible Probes
This is the list of all compatible probes that can be connected with IC-68
ND
control with a short
description of their function.
•
Temperature probe 2004-1K (red cap)
Temperature probe with a temperature range of -6 to 168.7 °F (-21.1 to 76 °C).
•
Temperature probe 2004-1KLT (blue cap)
Temperature probe with a temperature range of -43 to 165.7 °F (-41.7 to 74.4 °C).
•
Probe averaging box PAB-4
Connection box to easily connect 4 temperature probes to obtain an average.
•
Static pressure probe SPS-1
Static pressure probe with a measuring range of -0.200 to 0.200 ‘’ (-50 to 50 Pa) of water
column.
•
Relative humidity probe RHP-1
Relative humidity probe with a measuring range of 10 to 90 %.
•
Relative humidity probe RH-3
Universal relative humidity probe with a measuring range of 0 to 100 %.
•
After market probe (Non Varifan probes)
The IC-68
ND
is compatible with resistive type (potentiometer, on/off switch), voltage type, 4
to 20 mA type (you have to put on jumper JP1 for PRB5 or JP2 for PRB6) and pulse type
(water and feeder counter).
7.7 IC-68
ND
Compatible Modules
This is the list of all compatible modules that can be connected with IC-68
ND
control with a short
description of their function.
ON/OFF modules
•
CM10-2 (2 ON/OFF stages of 10 amperes)
•
CM3-2 (2 ON/OFF stages of 4 amperes)
Variable speed module
•
PM-1 (1 advanced variable stage with RPM feedback, backup probe, wind compensation…)
•
VSM-2 (2 variable stages of 10 amperes with manual override)
•
VSM-2/2 (1 variable stage with 2 output of 10 amperes with manual override)
•
VPM-2 (2 variable stages of 10 amperes)
•
VPM-1 (1 variable stage of 10 amperes)
Actuator and air inlet modules
•
SVIM-1 (Advanced curtain and air inlet module working in time or potentiometer mode)
•
CIP-1 (Curtain and air inlet module working in time mode)
•
CIM-1 (Curtain and air inlet module working in open/close mode)
Communication modules
•
SVPC-40 (PC computer interface)
•
SVS-10 (Communication port multiplier)
•
PMB-4 (Connection box to easily connect up to 4 PM-1 on one communication port).
Replacement Parts
www.monitrol.com
