background image

3

LIMITED WARRANTY

Varimixer warrants its commercial mixers to the original purchaser against defects in material or manufacture for a period of one 

year from the date of original purchase, subject to the following exclusions and limitations. The warranties provided by Varimixer do 

not apply in the following instances:

EXCLUSIONS

1. In the event that the equipment is improperly installed. Proper installation is the responsibility of the installer, proper installation 

procedures are covered in the Varimixer Spare Parts and Operations Manual.
2. In the event that the equipment is improperly maintained. Proper maintenance is the responsibility of the user. Proper maintenance 

procedures are covered in the Varimixer Spare Parts and Operations Manual.
3. In the event that failure or malfunction of the appliance or any part thereof is caused by abnormal use or is otherwise not attribut-

able to a defect in material or manufacture.
4. In the event that the appliance , by whatever cause, has been materially altered from the condition in which it left the factory.
5. In the event that the rating plate has been altered or removed.
6. On parts which would normally be worn or replaced under normal conditions.
7. With regard to adjustments and/or calibrations. Checking of and changes in adjustments and calibrations are the responsibility of 

the installer, Proper installation is the responsibility of the installer, proper installation procedures are covered in the Varimixer Spare 

Parts and Operations Manual.

If any oral statements have been made regarding the appliance, such statements do not constitute warranties and are not part of the 

contract of sale. This Limited Warranty constitutes the complete, final and exclusive statement with regard to warranties.

LIMITATIONS OF LIABILITY

In the event of warranty claim or otherwise, the sole obligation of Varimixer shall be the repair and/or replacement at the option of 
Varimixer, of the appliance or component or part thereof Such repair or replacement shall be the expense of  Varimixer 

except 

that 

travel over 100 miles or two hours, overtime, and holiday charges shall be,, the expense of the purchaser. Any repair or replacement 
under this warranty does not constitute an extension of the origin, warranty for any period for the appliance or for any component 
part thereof. Parts to be replaced under this warranty will be repaired or replaced at the option of Varimixer with new or functionally 
operative parts. The liability of Varimixer on any claim of any kind, including claims based on warranty, expressed or implied, con-
tract, negligence, strict liability or any other theories shall be solely and exclusively the repair or replacement of the product as stated 

herein, an such liability shall not include, and purchaser specifically renounces any rights to recover, special, incidental, consequential 
or other damages of any kind whatsoever, including, but not limited to, injuries to persons or damage to property, loss of profits or 
anticipated profits, or loss of use of the product. 

TO SECURE WARRANTY SERVICE

If you claim a defect covered by this Limited Warranty, first direct your claim to the local Authorized Service Agency, giving model, 

serial and code numbers, voltage, a description of the problem and your sales slip. If this procedure fails to be satisfactory to you, 
you may write to the Varimixer National Service Manager, 14240 South Lakes Drive, Charlotte, NC 28273; you should include the 
information listed above.

..

THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES WHETHER

..

WRIT-

TEN, ORAL OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF

..

MERCHANTABILITY OR 

FITNESS FOR PARTICULAR PURPOSE OR WARRANTY AGAINST LATENT

...

DEFECTS.

Summary of Contents for ERGO60

























Reviews: