Varimixer KODIAK V20KT, Operating Instructions And Spare Parts Lists

12

12345678

12345678

12345678

XXXXX

XXX

12345678

12345678

XXX

X

Overloading:

The machine must not be overloaded. 

Possible overload situations:
•  Working with excessively tough and heavy dough 
•  Mixer tool exceeding the recommended speed
•  Wrong mixer tool being used. 

Larger lumps of fat or chilled ingredients must be reduced 

before they are placed in the bowl.

Overloading will cause the frequency converter to stop the 

machine. 

, 

 or 

will be displayed in the timer 

field.

Follow the description under “

Procedure  in  case  of 

 overloading”

.

Procedure in case of overloading:

Spot the error code in the section 

“Error codes and possible 

solutions”, page 14 

and follow the suggestion for a solution. 

When done, remove the error code by pressing 

.

The mixer can now be restarted by pressing 

.

Recommended speeds:

Correct use of tools:

Recommended uses of tool:

The whip should not be struck against hard objects 

such as the edge of the bowl. This will shorten the 

life of the tool because of increasing deformation.
To make mashed potato, use the beater and then 

the standard whip. 

Cleaning:

The machine may only be cleaned by trained staff 

over 18 years of age.

The machine should be cleaned daily after use. It should be wiped 

with a soft brush and clean water. Sulphonated soaps should be 

used with care, as they destroy the lubricants in the machine. 

The machine should never be rinsed with a hose.
The machine parts made of aluminium, bowl arms 

and bowl trolley, must not be washed with very 

alkaline cleaning agents (pH must be between 5.0 

and 8.0).
Please note that the plastic safety guard may be 

damaged if it is exposed to high temperatures for 

a prolonged period.  

(Max. temperature 140

o

  F)

The filling chute is dishwasher-safe.

The soap suppliers may be able to help by recommending the 

right type of soap.

Lubrication and grease types:

Lubrication and other servicing may only be carried 

out by trained staff over 18 years of age.

The lid of the mixer may only be removed when the 

cable to the power supply has been removed.

When repairs are made to the mixer head, the gear wheel and 

internal gear should be lubricated with 

Molykote G-1502

 the 

needle bearings in the mixer head can also be lubricated with 

this type of grease. 
If the machine is supplied with an attachment drive, the gear for 

the attachment drive should be lubricated with 

Statoil Grease-

Way LiCa 80

.  

Do not use any other grease types than those specified above.

Attachment drive:

The machine may be fitted with an attachment drive into 

which optional accessories, such as meat mincers and 

 vegetable cutters, can be attached.
For further information on the assembly and use of optional acces-

sories, please refer to the manual that comes with the  accessory.

The machine must be shut down when the 

 accessory is fitted to the attachment drive.

Recommended speeds for 

attachment drive:

Whip

Beater

Hook

Cream

Cake mix

Bread dough

Egg whites

Butter cream

Rye bread

Mayonnaise

Waffle mix

etc.

etc.

Forcemeat

etc.