background image

3 kg

1,5 kg

7

KODIAK user-friendliness:

KODIAK has been designed in partnership with kitchen and bakery staff, which has resulted in a number of user benefits:

The machine itself

Can be connected to the mains by the user (standard voltage)

Is made of stainless steel
Has height-adjustable feet to ensure stability even on sloped area
Is easy to clean, with large surfaces and a removable safety guard which can be machine-washed
The control panel combined with the large bowl diameter provides a good view of the contents of the bowl.

Control panel:

The control panel is simple and intuitive, with large push buttons.
The panel is easy to clean with a damp cloth.
There is a built-in timer function with a display, which can also be used to show the number of operating hours.

Bowl.

The bowl is not very deep but has a large diameter, which makes it easier to see the contents while working.

Safety guard:

The one-piece safety guard is made of transparent plastic. The guard 

is easy to remove and clean. 

The guard can be machine washed at up to 60

and can withstand up to 

90

o

 for short periods.

The guard is made of a special impact resistant material which can 

withstand daily use in a commercial kitchen.

The safety guard is held in place by magnets.

It is not possible to attach the guard incorrectly.

The arrows indicate the 

force  required to remove the 

screen:

Summary of Contents for KODIAK10

















Reviews: