Varimixer V20K, Operating Instructions And Spare Parts

10

KODIAK user-friendliness:

KODIAK has been designed in partnership with kitchen and bakery staff, which has resulted in a number of user benefits:

The machine itself:

Can be connected to the power grid by the user (100V-240V).
Is made of stainless steel.

The floor model has height-adjustable feet to ensure that the high bowl trolley works properly.

Is easy to clean, with large surfaces and a removable safety guard which can be machine-washed.
The power cord is connected to a waterproof silicone plug and can not be shaken from the machine (100V-240V).
The inclined control panel combined with the large bowl diameter provides a good view of the contents of the bowl.
The machine is equipped with a spring that helps to lift and lower the bowl.

Control panel:

The control panel is simple and intuitive, with large push buttons.
The speed can be increased/decreased continuously by holding down 

 and 

. It is also possible to ‘step’ between the 

predefined speeds 

12345678.

The panel is inclined at the ergonomically correct height, making it very comfortable to use.
The panel is easy to clean with a damp cloth.
There is a built-in timer function with a display, which can also be used to show the 

number of operating hours.

Safety guard:

The one-piece safety guard is made of transparent plastic. The safety guard is easy 

to remove and clean. The safety guard can be machine-washed at up to 140

o  

F and 

can withstand up to 194

o

 F for short periods.

The loose silicone filling chute withstands being exposed to hot ingredients up to 

392

o 

F, and is dishwasher-safe.

The safety guard is made of a special impact-resistant material which can withstand 

daily use in a commercial kitchen.
The safety guard is held in place by magnets, so there are no loose parts that can 

break or collect dirt.
It is not possible to attach the safety guard incorrectly.
A force corresponding to 6.6 lbs or 30 N should be used to remove the safety guard.

The filling hole in the safety guard can be turned to suit the user’s needs.

Bowl and bowl trolley (bowl trolley only floor model):

The bowl is not very deep but has a large diameter, which makes it easier to see the 

contents while working.
The bowl does not have to be lifted into place in the bowl arms, but can be wheeled 

directly into position.
The bowl trolley is used for transfer from mixer to workbench, dishwasher, stores etc.
The bowl trolley provides an ergonomically correct working height.
The bowl trolley spares the user any heavy lifting.
The bowl can be tilted in the rubber ring on the bowl trolley.

Tools:

The machine whip is very compact in design, which provides for a long service life. It must be handled according to these 

 instructions.
The bowl, beater, hook and whip are made of stainless steel.