Varimixer V20K, Operating Instructions And Spare Parts

11

Before starting the machine:

Floor model: Place the bowl in the bowl trolley. Put the desired 
tool into the bowl and wheel it into position between the bowl 
arms. Ensure that the bowl is correctly engaged with the bowl 
arms; see “

Installation, adjustments and fixing”, page 5

.

Table model: Put the desired tool into the bowl and place the 
bowl in the bowl arms.

Fit the safety guard and turn it so the filling hole is accessible 

when the machine is running. 

The loose filling chute must be 

used if it is necessary to add hot ingredients during the process 
(i.e. ingredients at temperatures above 140

o

  F).

Turn the tool to lock it into the bayonet fitting.

Lift the bowl with the aid of the lifting handle. 
The mixer is now ready to start.
It is possible to set both the running time and speed before 
 starting the machine; see next section:

Start the machine:

Press 

 to start the machine.

Press 

 next to 

 to increase the speed.

Press 

 next to 

 to reduce the speed.

The speed is shown as a number on the scale 

12345678

.  

The display 

12345678

 represents the lowest speed, 

 approx. 64 rpm.

The display 

12345678

 represents the highest speed, 

 approx. 353 rpm.

If a specific start speed is wanted, you set the speed and then 

start the machine by pressing 

.

Display of running time – Timer function:

Select a running time for the machine by pressing 

 next 

to 

. The running time is shown in minutes and seconds in 

the timer field between 

 and 

.

Running times of up to 90 minutes are available.

When the machine is running, the running time will not be reset 
if 

 is pressed once; press 

 once more and it will be reset.

If no running time is selected, the display will show the time 
elapsed since the machine was started.

If the time set on the timer runs out while the mixer is running, 
the machine stops and you hear a beep.

Inspection of ingredients while in use:

If the machine needs to be stopped temporarily without affecting 

the running time, press 

. The machine will slow down and 

then stop and the running time will stop too. 

The bowl can now be lowered and the ingredients checked.

Lift the bowl and press 

, and the machine will start and the 

running time will resume. 

Stop the machine:

To stop the machine:
•  Press 

. Running time not reset.

•  Press 

 twice. Running time reset.

•  Press the emergency stop - the running time will be reset.
•  Lower the bowl - the running time will be reset.
In all cases the machine can be restarted by pressing 

.

It will start at the lowest speed.

Operating the machine:

Emergency stop

Stop

Increase time

Timer (timer field)

Decrease time

Speed 

 indicator

Decrease speed

Increase speed

Start