Varimixer V20K, Operating Instructions And Spare Parts

14

Error codes and possible solutions:

For some errors, the control system will show an error code in the display:

  User pressed 

 without raising the bowl to working height.

Solution

:  Raise bowl to working height. 

  User pressed 

 without fitting the safety guard.

Solution

:  Fit the safety guard.

  The Thermal sensor in the motor has overheated.

Solution

:  The error will disappear when the temperature has dropped to an acceptable level.

Stop the machine and reduce the quantity of ingredients in the bowl. When it starts again, select a lower speed.

  There is an error in communication between the control panel and the frequency converter.

Solution:  Call the engineer.

  Error in frequency converter.

Solution

:   Call the engineer.

  Thermal sensor in the frequency converter has cut out.

Solution

:  The error will disappear when the temperature has dropped to an acceptable level.

  Intermittent low voltage in the power supply.

Solution

:  The power supply to the machine should be checked by an expert.

  Intermittent high voltage in the power supply. 

Solution

:  The power supply to the machine should be checked by an expert.

  The machine is overloaded - continuously for 50 seconds.

Solution

:  Reduce the quantity in the bowl; alternatively, the product may need to be divided into smaller parts or diluted before 

the machine is restarted. When restarted, select a lower speed, if speed was the problem.

The error code is removed by pressing 

  The machine is overloaded - momentarily (overloaded 8 times within 20 seconds.

Solution

:  Reduce the quantity in the bowl; alternatively, the product may need to be divided into smaller parts or diluted before 

the machine is restarted. When restarted, select a lower speed, if speed was the problem.

The error code is removed by pressing 

 Blockage.

Solution

:  Remove the object that caused the blockage.

The error code is removed by pressing