6-4
VariQuest
®
Perfecta™ 3600STP
User’s Guide
Paper Loading Error Messages
Paper Loading Error Messages
Paper Loading Error Messages
Message
Suggested Action
Paper loaded with too much
skew.
• During the paper load process the printer detected that the paper
had too much skew. Press
OK
to unload the roll automatically,
then restart the process.
Paper not detected.
• During the paper load process the printer did not detect any paper.
Verify the paper is inserted fully and is not transparent.
Paper too far from lateral edge.
• Reload the cut sheet, aligning the right edge against the black stop
on the spindle.
Paper load failed. Paper width is
smaller than the minimum size
supported by the selected paper
source.
• Paper width is smaller than the minimum size supported by the
selected paper source.
• Cut sheets smaller than ISO A3 must be loaded using the multi-
sheet tray.
Sheet too big.
• During the load process the printer detected that the sheet of
paper is either too wide or too long to be loaded correctly.
Sheet too small.
• During the load process the printer detected that the sheet of
paper is too narrow or too short to be loaded in the printer.
