6-60
VariQuest
®
Perfecta™ 3600STP
User’s Guide
Scanner Diagnostic Plot
Scan or copy the diagnostic plot.
There are two options for evaluating the diagnostic plot: scanning
into a JPEG file, or copying onto paper. We recommend using the
scan option, so the generated file can be analyzed more easily by
a remote support engineer if necessary.
To scan
: Adjust your computer’s monitor as described in
. Once you have scanned the diagnostic
plot, open the scanned file in any image viewer software and
select a zoom of 100% for correct visual evaluation of patterns.
To copy
: Make sure that a paper roll at least 36 in. (914 mm) wide
is loaded in the printer. Ideally, the same type of paper used to
print the diagnostic plot should be used for copying it.
Use the following settings:
Scan
•
Resolution
: 600 dpi
•
File type
: JPG
•
Compression
: Medium
•
Paper type
: Photo or matte, according to the paper used to print
the diagnostic plot. Use photo if in doubt.
Copy
•
Content type
: Image
Load the diagnostic plot into the scanner input tray with printed
side up. The black arrows on the diagnostic plot indicate the
direction of loading. Make sure the diagnostic plot is loaded
without skew and it is centered (i.e., it covers the whole scanner
area).
Once you have scanned the diagnostic plot (if using the scan option),
open the scanned file in any image viewer software and select a zoom
of 100% for correct visual evaluation of patterns.
Paper Jams (Continued)
Problem
Suggested Action
