VariQuest
®
Perfecta™ 3600STP
User’s Guide
6-77
Front Panel Error Messages
Add Hardware Addresses to Wireless Access Point (WAP)
Front Panel Error Messages
Occasionally you may see one of the following messages appear on the front-
panel display. If so, please follow the advice in the Suggested Action column.
Front Panel Error Messages
Message
Suggested Action
[Color] cartridge is very low on ink.
Ensure that you have a new cartridge of the same
color ready.
Depleted cartridges must be replaced to
resume printing
Replace the cartridges as needed. See
One or more cartridges appear to be missing
or damaged.
Insert cartridges of the correct color as needed.
See
“Replace Ink Cartridge” on page 5-3
Paper jam.
See
“Paper Loading Error Messages” on page 6-4
Paper width is smaller than the minimum size
supported by the selected paper source. Load
canceled.
Remove the paper and load paper of the correct
size.
Loaded paper is too wide. Manual unload
required.
Remove the paper manually and load paper of the
correct size.
Paper too far from lateral load line. Please try
again.
Remove and reload the paper.
Please manually unload roll paper and try
again.
Rewind the roll manually.
Single sheet is loaded with too much skew.
Please eject to unload the paper.
Remove and reload the paper.
The current job has been cancelled because
the roll is out of paper. Load the roll and send
the job again.
Load a new roll.
You are printing a multipage job. Load another
sheet to continue printing or cancel the job.
Load another single sheet.
Multi-sheet tray is out of paper. Load paper in
multi-sheet tray and press OK to continue
printing or cancel the job.
Load paper into the multi-sheet tray.
End of roll has been reached. It is not possible
to load the roll.
Load a new roll.
