1
IDENTIFICATION
1.1 Manufacturer:
VARISCO POMPE Srl
Zona Ind. Nord - Terza Strada, 9 - 35129 PADOVA - Italy
1.2 Typ of pump
Self-priming gear pump.
1.3 Instruction book identification
Prepared: January 2002
Edition: 04
Rev. 00
Date of revision :
1.4 Nameplate information
The values shown for the capacity (m
3
/h), head (m), power (kW) and speed (RPM) refer to testing with oil at 20°C and 100 cSt.
1.5 Field of application
The pumps are suitable for handling liquids of viscosity up to 100 000 cSt.
1.6 In case of breakdown
Contact the nearest Varisco distributor (see list below) or the Varisco factory:
Phone:
+ 39 049 82 94 312
Fax:
+ 39 049 80 76 762
2
WARRANTY
- The manufacturers guarantee that only high quality materials are used in the construction of their pumps and that machining and assembly
are carried out to high standards.
- The pumps are guaranteed against defective materials or faulty workmanship for a period of one year from the date of delivery unless spe-
cifically stated otherwise in writing.
- The warranty is not valid if the pump has been tampered with by third parties.
- Replacement of parts or of the pump itself can only be carried out after careful examination of the pump in an authorised workshop by qua-
lified personnel. The pump should be sent carriage paid.
- This guarantee does not cover parts subject to deterioration or normal wear and tear (seals, diaphragms, pressure and vacuum gauges, rub-
ber or plastic items, etc.) or damage caused by misuse or improper handling of the pump by the end user.
- Parts replaced under guarantee become the property of the manufacturers.
Date
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
GENERAL INSTRUCTIONS
The goods must be examined on arrival to ascertain any damage caused during shipment. Loss or damage must be notified immediately to
the carriers and to the sender. Check that the goods correspond exactly to the description on the shipping documents and report any diffe-
rences as soon as possible to the sender. Always quote the pump type and serial number stamped on the nameplate.
The pumps must be used only for applications for which the manufacturers have specified:
- the construction materials
- the operating conditions (pressure, speed, temperature, etc.)
- the field of application
In case of doubt, contact the manufacturers or an authorised distributor.
+ 39 049 82 94 312
TYPE
identifies the model of the
pump and/or unit (pump/gear
box/motor etc.)
TYPE
MATR.
ITEM
m
3
/h (max)
m (max)
kW
RPM (max)
kg
MATR.
the serial
number of
the pump
ITEM
the number which links the pump
to the contract documents (only if
requested)
kg
the weight of the pump or of the
unit, excluding the weight of liquid
in the pump casing and fuel in the
fuel tank.
Year of manufacture
m
3
/h
(max)
the maximum capacity of
the pump, measured at
the maximum speed
m
(max)
the closed valve head of
the pump measured at
the maximum speed
kW
the maximum input
power of the pump at the
maximum speed
RPM
(max)
the maximum operating rotation
speed of the pump. The pump
must never be run faster than this
speed.
4
