5-4
VariQuest
®
Cutout Maker 1800 User’s Guide
Maintenance Summary
Replacing the Cutting Blade
6.
Carefully position the blade in the blade holder [6] and insert it until only
1/4 inch of the blade protrudes from the holder.
CAUTION!
CAUTION!
The cutter blade protrudes from the blade holder slightly even when retracted.
Take care to avoid contact with the blade. Personal injury or equipment damage
may result if the blade is touched.
7.
Set power switch [7] to
I
(ON) to activate the electromagnet that draws the
blade into its fully seated position within the blade holder.
6
7