The heat pump should always be
positioned in correct level or 1°
backwards for the defrost water
to run out in a prober way.
Defrost water tube must be
mounted in correct level of the
defrost water outlet of the heat
pump and into the drainage. If
the tube is above correct level
the defrost water will run
backwards and into the heat
pump and could cause water
leakage and this will cause
exclusion of warranty.
1°
90°
Level of defrost water outlet
Applicable for both VT100C and VT180C
Applicable for both VT100C and VT180C
To reach the hot- and cold water
connections remove the two
support brackets.
We recommend after pipe
installation that either (1) or (2)
support bracket is mounted back
onto the feet of the heat pump
depending on water pipes
coming from the front or
backside of the heat pump.
Applicable for both VT100C and VT180C.
OTHER INSTALLATION REQUIREMENTS
INSTALLATION
1
2
ENGLISH
11
