After mounting the 2 brackets on the wall.
- Carefully pick up the heat pump and move towards the wall.
- Slowly begin to lower the heat pump until it graps into the support bracket (1) and lands onto the lower bracket (2)
- Before letting go of the heat pump be sure it has grapped into the support bracket (1) else the heat pump will turn
forward.
- When the heat pump is fixed then check that it is positioned onto the lower bracket (2) else adjust the bracket a bit.
- Gently press down and pull the heat pump towards you to check if it is safe enough to start connecting water supply.
On a daily basis it is not allowed to put any items,
animals or persons onto the heat pump due to
increased weight and can cause serious damage
if support brackets cannot hold the extra weight.
The non-respect of these requirements will be
the reason of warranty exclusion and any cost on
material, animal and personal damages cannot
be forwarded to the manufacturer of this product.
USER ONLY
1
2
ENGLISH
13
