Software
1.62
Timer
Off
Timer
On
Clock
12:00
ClockSet
12 h
With use of software version 1.62 - 1.65 it is possible to use
the timer function witin the software instead of an external
installed timer/clock unit.
To check the software version you must go into installers
menu, hold the rotary button for some seconds and the
software version will appear.
User menu:
use the rotary button to scroll to the Timer menu.
As factory setting the tiemr function is set to “OFF”.
User menu:
Press the rotary button until the text flashes and then
rotate the button until “ON” appears. Press the rotary
button once and timer will be activated.
Note!
LED light will appear in red light because the user
must configure the timer before the LED turns green.
User menu:
Use the rotary button to scroll to “Clock” menu.
As factory setting it is set to 12:00. This menu is only a
status menu.
User menu:
Use the rotary button to scroll to “ClockSet”. Press the
button until text is flashing and adjust the hours to real
time hours, look at the household watch, and press the
button again to acknowledge.
USE OF TIMER FUNCTION
ENGLISH
36
