6
Värmebaronen EP 26E and EP 42E
Menu - handling
Menus
There are three levels in the menus:
User level:
Reading and modification of the most common
parameters. Menu row 0 is the row that normally appears,
and the menu automatically returns here from other menus
if no button is selected for a certain period of time.
Service level:
Here are the most common settings that
may need to be changed during boiler operation.
Advanced service level:
Advanced service settings
and manual operation of the boiler.
Handling
Indicators and buttons
Green
Perma-
nently on
The boiler has voltage.
Flashing Output activation limits.
Yellow
Perma-
nently on
Displays a modifiable parameter.
In row 0, solid yellow means that a warning
is acknowledged but the cause remains.
Fast
flashing
Parameter has been changed but not
acknowledged .
Flashing Warning
Red
Flashing Alarm, which has not been acknowledged.
Perma-
nently on
Acknowledged alarm as long as the cause
has not been corrected.
The buttons are used to navigate the menus:
Moves up in the menu list.
Moves down in the menu list.
Decreases the value.
Increases the value.
Acknowledges the changed value.
Menu options
The menu bar number appears on the display, followed by
a decimal point and a value, at larger values, the display
switches between displaying the row number and its value.
Access to the Service level is obtained by simultaneously
pressing and on any menu row in "User Level".
The same action is used to return to "User Level".
Access to the "Advanced Service level" is obtained by setting
the value "21" in the last menu bar in "Service level".
Return to the menu item "Installation/service level" is done
by going back with .
Return to "User level" is done by simultaneously pressing
and .
An editable menu row is indicated by the yellow indicator
light. When the value changes, the yellow indicator flashes.
The new value does not apply until it is acknowledged by
pressing .
The old value is removed if the row is left with or .
Screen saver
The screen saver will be activated 15 minutes after the last
button press.
- The menu resets to show the current boiler temperature
and the "21-lock" for the advanced service menu is reset.
- If there are no unacknowledged alarms, the display will turn
off and only the indicators will be lit.
Alarm
If several simultaneous alarms/warnings/restrictions are
active, only the first alarm code is shown in the list. To view
all alarms, scroll with the
A red indicator flashes when one or more alarms are active.
The alarm relay switches to alarm mode the same time as
the display. The display switches to display the menu bar
(row-1) where the current alarm codes are displayed. If more
than one alarm is active at the same time, the alarm row will
switch content and display all current alarm codes according
to a rolling schedule.
Once the cause of the alarm is resolved and is acknowledged
with OK, the red indicator stops flashing. The display will
return to its normal display.
