POWDP4060
EN
Copyright © 2019 VARO
P a g e
|
3
www.varo.com
MULTI-USE TOOL 20 V
POWDP4060
1 APPLICATION
Depending on which accessory mounted this power tool is intended for dry sanding small
areas and for sawing, scraping polishing, rasping, cutting and separating.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A
– FIG. 8)
1.
Quick release lever
2.
On/Off switch
3.
Power-on led
4.
Speed dial
5.
Vent holes
6.
Saw blade
7.
Quick release clamp
8.
Locating pins
9.
Cover clamp
10. Dust adaptor
11. Dust pipe
12. Sanding plate
13. Battery (not included)
14. Charger (not included)
3 PACKAGE CONTENT LIST
▪
Remove all packaging materials.
▪
Remove remaining packing and package inserts (if included).
▪
Check that the package contents are complete.
▪
Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
▪
Keep the packing materials as far as possible till the end of the warranty period. Dispose it
into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1 x multi-use tool
1 x sanding plate
2
x 3” sanding papers
1 x grain 60
1 x grain 80
1 x 3,2cm saw blade
1 x 3;2cm scraping blade
1 x vacuum pipe
1 x vacuum attachment
1 x manual
If any parts are missing or damaged, please contact your dealer.
