POWX0496
EN
Copyright © 2021 VARO
P a g e
|
6
www.varo.com
Now replace the textile polishing cap with the fine
polishing cap and stretch the latter over the polishing
pad. Make sure it is completely clean. Remove the layer
of polish in the same order as it was applied.
Important! Do not apply pressure on the polishing tool!
8 CARE TIPS
For optimum paintwork protection, you should polish your car 2 to 3 times a year.
Wash your car at least every 2 weeks. Avoid using household detergents as these can
damage the paintwork and remove the layer of wax.
Wash your car with a clean sponge, working from top to bottom.
Remove all insects, bird droppings and tar stains from the paintwork daily.
If you use any window-cleaning agents, spray them onto a cloth and not directly onto the
windows to prevent them wetting the paintwork.
CAUTION: Do not polish in direct sunlight or allow polish to be baked dry
on your car.
9 TECHNICAL DATA
Rated voltage
220-240V
Rated frequency
50Hz
Rated input
110W
Protection class
II
Rotation speed
3100min
-1
Weight
2.4kg
Disc Diameter
Ø240mm
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
60 dB(A)
Acoustic power level LwA
71 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
11.5 m/s²
K = 1.5 m/s²
11 MAINTENANCE
The tool requires no special maintenance.
Regularly clean the ventilation slots.
Regularly wash the polishing covers. Wash them by hand only and leave them to dry in
the air.
If you do not plan to use the tool for an extended period of time, remove the polishing
cover from the polishing wheel. Store the tool with the polishing wheel pointing up.
