POWXG60215
EN
Copyright © 2015 VARO
P a g e
|
10
www.varo.com
All wheels will be in the same height of cut.
Medium position is best for most lawns.
9.6
Rear cover position / grass expelling
The rear cover can be used in 2 positions:
Cutting up and collected in the grass catcher
Cutting up and ejecting backwards
9.7
Gras box warning system (Fig. 6)
There is a warning piece in the grass catcher which will indicate the grass volume.
If the flap is open it means that there is still space for grass collection. (Fig. 6A)
If the flap is closed it means that there is no space for grass collection. (Fig. 6B)
9.8
Mowing tips
Under certain conditions, such as very tall grass, it may be necessary to raise the cutting
height to reduce resistance (prevent overload of the engine) and leaving clumps of grass
clippings. It may also be necessary to run the lawn mower over the area a second time.
For extremely heavy cutting, reduce the width of cut by over lapping previously cut paths
and mow slowly.
The pores in the cloth grass catcher can become blocked with dirt and dust and will
collect less grass. To prevent this, regularly hose down the grass catcher and let dry
before re using.
Keep the top of the engine (around the starter) clear and clean of grass clippings and
chaff. This will help engine air flow and extend engine life.
10 4 IN 1
These lawn mowers can be retrofitted from its normal function, based on the application
purpose:
From lawn mower with rear discharge to, Mulching mower or as side-discharge mower.
10.1
What is mulching
When mulching, the grass is cut in one working step, then finely chopped and returned to the
grass strip as natural fertilizer.
Hints for mulch-mowing:
Regular cut-back by max. 2 cm from 6 cm to 4 cm grass height.
Use a sharp cutting knife
Do not mow wet grass
Set to max. motor speed
Only move at working pace
Regularly clean mulching wedge, housing inner side and mowing blade
10.2
Different uses
10.2.1 Retrofitting for mulching mower (Fig. 7)
WARNING: only with a stopped motor and standstill cutter.
1.
Raise the rear cover and remove the grass catch bag.
2.
Push the mulching wedge into the deck. Lock the mulching wedge with the button into the
opening on the deck.
3.
Lower the rear cover again.
