POWXG6026
EN
Copyright © 2014 VARO
P a g e
|
8
www.varo.com
10 4 IN 1
These lawn mowers can be retrofitted from its normal function, based on the application
purpose:
From lawn mower with rear discharge to:
Mulching mower or as side-discharge mower.
10.1
What is mulching
When mulching, the grass is cut in one working step, then finely chopped and returned to the
grass strip as natural fertilizer.
Hints for mulch-mowing:
Regular cut-back by max.2cm from 6cm to 4cm grass height.
Use a sharp cutting knife
Do not mow wet grass
Set to max. motor speed
Only move at working pace
Regularly clean mulching wedge, housing inner side and mowing blade
10.2
Different uses
10.2.1
Retrofitting for mulching mower (Fig 4)
WARNING: only with a stopped motor and standstill cutter.
1.
Raise the rear cover and remove the grass catch bag.
2.
Push the mulching wedge into the deck. Lock the mulching wedge with the button into the
opening on the deck.
3.
Lower the rear cover again.
10.2.2
Resetting for side-discharge mowing (Fig 5)
WARNING: only with a stopped motor and standstill cutter.
1.
Lift the rear cover and remove the grass catch bag.
2.
Mount the discharge channel.
3.
Lift sideward flap for side discharge
4.
Mount the discharge guide for side discharge on the support pin of the sideward flap.
5.
Lower the sideward flap- the flap lies on the discharge channel.
10.2.3
Mowing with the grass catch bag
WARNING: only with a stopped motor and standstill cutter.
1.
For mowing with the grass catch bag, remove the mulching wedge and discharge
channel for side discharge and mount the grass catch bag.
2.
Removing the mulching wedge.
-Lift rear cover and remove the mulching wedge.
-Removing the discharge guide for side discharge:
3.
Lift sideward flap and remove discharge channel.
-The sideward flap automatically closes the discharge opening on the housing by mean of
spring force.
